NEW! FCE FAC Function
The Myron L® Company FCE function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L® Company FCE function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.
Multiparameter Meter for Various Water Quality
The Myron L® Ultrameter II 6P is an
excellent multiparameter water quality meter used by thousands of water
treatment professionals. The instrument can test for pH, total dissolved solids,
conductivity, resistivity, oxidation reduction potential, temperature, and has
the capability of testing for free chlorine. This meter handles the job of SIX
single parameter testers using one single water sample.
Quick and easy testing:
- Rinse the
cell cup and fill with sample
- Push the
parameter button and record the measurement
Accuracy You Can Count On
If you are doing any sort of water
testing that requires a certain degree of accuracy, then this multiparameter
meter will be your best friend. It has an accuracy spec of +/-1% of reading
(not merely full scale). The integrated cell cup contains four electrodes
allowing for stability throughout the full range of measurement.
Easy to Calibrate
You can easily reset the instrument to
the factory default settings to quickly calibrate when in the field. For
greater accuracy, you can use NIST calibration solutions and adjust the
settings using the keypad buttons.
The Ultrameter 6P can be used for
water quality analysis in many situations.
Need a water conductivity meter and TDS
tester? Looking for a pH ORP tester? Count on the accuracy of this water
quality instrument! The Myron L® Ultrameter II has got you covered. The pH and
ORP sensor is very durable and can withstand many applications _ÑÐ quality of irrigation
water, hydroponics water, laboratories, reverse osmosis water quality, deionization,
wastewater testing, cooling tower water treatment, environmental, desalination,
and fountain solutions. Whether testing aggressive chemicals or pure water,
this instrument will hold calibration and continue to support your daily
The Ultrameter II 6P is calibrated
with NIST standards before being shipped to you, so you can use it immediately
- Automatic temperature compensation
to 25 degrees Celsius.
- Powered by a long-lasting 9V
battery; Auto-shutoff maximizes the lifespan to more than 100 hours/5000 tests.
- Waterproof up to 3ft and it floats!
- The display automatically shifts the
decimal to give you the best accuracy for your range of measurement.
- You can save up to 100 measurements
(w/ date & time stamp) then download them to your computer saving time and
reducing errors*. (*Requires optional bluDock wireless accessory)
- User adjustable conductivity/TDS
conversion ratio for greater accuracy when measuring solutions not contained in
- Non-volatile microprocessor provides
data back-up, even when the battery is changed. This assures all calibrations
and memory data will be retained.
High Performance at a Low Cost
Other multiparameter meters require
external sensors, frequent calibration, and must be sent back to the
manufacturer annually. The Ultrameter II 6P is an affordable, simple to use
water quality meter that gives you better return on your investment than other